I put a Chev 350/350 in my '38 Ford. How can I mate the Ford speedometer to the newer Chev trans? Does anyone make
a cable like this?
Thanks
--
Keith Stocker

Keith, if you check Street Rodder or some other car magazines, you will find a few companies that can make what you need. Hemings Motor news will also be a good source to look. Outside of that, I always used aftermarket speedo's and didn't encounter your problem.
--
Lynn Stallbaumer

The stock one should work. It does in a 40 Ford with SBC/T350. My brother had this combimation and we used a new but stock cable. It is difficult to change the speedometer gears to get the speedo correct. Not difficult to figure out..... difficult to physically remove and reinstall.

Try to do it before final time you install the trans.

Try this link for help:

http://www.tciauto.com/tech_info/speedo_gears.htm

Hope this helps.........


--
Same Wife, Same DEUCE Roadster, Same Job for over 20 years. Must be in a rut. AIN'T LIFE GRAND.....

A stock one should work IF you are talking about hooking it up to a stock speedometer, not aftermarket speedometer.


--
Same Husband, Same Roadster, Same Job for over 20 years. Life is GOOD!

I took my spedo&spedo gear to a parts store and went through the catalog.
--
Primer is my favorite color. D.S.R.A