I am still trying to find a windshield crank assembly for my dads 35 ford pickup. I really want to find him one! I missed out on the one on ebay awhile back because it took them so long to set up my account. If anyone knows where I can get a repro or the original thing please let me know. I have looked in his books and I cannot find one of these assemblies. Thanks for any help!!!

wishbone,
you could check at martell auto salvage in wishek, n.d.
i understand they specialize in old vehicles. i haven't been there to check it out, but am told they have hundreds of parts vehicles.
phone 1-701-452-2339
good luck,
rickd
--
project...39 ford pickup

http://www.dickspadaro.com/page_61.html Seen the handles here. Nice repro.
--
I'll drive it anywhere anytime.

Thanks Raptor! Dick spadaro had them but said they were no longer making them. I really appreciate the help, we almost had it!

Are you sure you want one??? This 35 doesn't look like he has one!!!! http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2401919686&category=7250
--
Home to Lugnut!
NSRA,GG,Doughnut Derilects,CRS, Trophy Whores,etc,etc...
Charter Member: Dipstick Street Rod Association

Yeah, Dad is wanting one. After looking at the online catalog for Dick Spadaro, it said for 35-36 ford also fits 35-36 ford pickup. Maybe the ones for cars will work on pickups. I don't know but if anyone locates one either for a car or a pickup give me a yell!

MAYBE ? ...
1933-34 WINDSHIELD REGULATOR Mint regulator with knob, works perfectly. $275 -
Ryan Sanders email; fomoco2002@fastmail.fm
http://restored-classics.com/carparts/page3.html
--------
MY GUESS : 33-34 is DIFFERENT
--------
--
I'll admit , she can't wrestle , but you should see her box.

Thanks for the help gang. I found out today that this part has been discontinued, no repro places are carring it anymore. If anyone comes across an original let me know! Thanks again!

Good Luck finding anything for the 35-37 PU on the bay that the price doesnt skyrocket. I also check it daily.

I was going to get teh Spardo repo for my 35 eventually, but I guess Ill have to soak mine in molassas to try to get it unstuck. Sorry, I dont have another one.
--
Damn, I wish I had more time.
35 Ford Pick-Up

Yeah, me too! Thanks anyway. It seems like you can find everything for the 35 except that.

Adam- try this site..they have them listed http://www.cwmax.com/fordwper.htm GOOD Luck!!!
--
Home to Lugnut!
NSRA,GG,Doughnut Derilects,CRS, Trophy Whores,etc,etc...
Charter Member: Dipstick Street Rod Association

Thanks Bill! I got a email into them waiting for reply. I may have found one at a junkyard in Colorado. Checking into that now!

Did you get a response yet? I was on e-bay last night and there was listed a windshield in a frame...looked pretty good.
--
Home to Lugnut!
NSRA,GG,Doughnut Derilects,CRS, Trophy Whores,etc,etc...
Charter Member: Dipstick Street Rod Association

I got one back that he had the part. I told him I needed to see a pic and what I did for a job and haven't recieved the pic yet. Waiting to see the pic before I send him a penny. I guess I deal with the bad people at work so much that I am not very trusting in something I have never seen! I looked at the ebay listings but none of them have a regulator with the windshield. Thanks for all the help, I guess for now I am still looking!

But ...did you get the glass and frame yet????
--
Home to Lugnut!
NSRA,GG,Doughnut Derilects,CRS, Trophy Whores,etc,etc...
Charter Member: Dipstick Street Rod Association

He had the frame and windshield just no regulator. The guy emailed me the pics and is holding the part for me so I guess I found one! I want to thank all of you for your help and suggestions! Bill, how is your windshield fixed in the panel? And have you seen that 36 panel for sale on ebay? It needs alot of work but alot has already been done. If I didn't have the 50 I would bid on that!

Mine is just a flat glass and a seal..I just fabricated a lip and welded it in place. The 36 panel would cost a lot to get from Ca.
--
Home to Lugnut!
NSRA,GG,Doughnut Derilects,CRS, Trophy Whores,etc,etc...
Charter Member: Dipstick Street Rod Association

Adam - how did the deal work out???
--
Home to Lugnut!
NSRA,GG,Doughnut Derilects,CRS, Trophy Whores,etc,etc...
Charter Member: Dipstick Street Rod Association

The part is on the way! Glad that treasure hunt is over. Thanks for all the help gang!!!!

Now that you found one there are 2 listed on e-bay..go figure!
--
Home to Lugnut!
NSRA,GG,Doughnut Derilects,CRS, Trophy Whores,etc,etc...
Charter Member: Dipstick Street Rod Association

I saw that! I said as soon as I found one there would be some come out for sale. My dad and I had a good laugh about it. Just as well to laugh as cry!

If passenger car is the same as a pickup, I have a couple. Email me.
--
Anyone can restore an old car, it takes a man to cut one up.

Guess what Frank. I was going to say the same thing. Pretty sure there's a passenger one in my attic. While we're looking for parts, and since we're here because of "Wishbone" anyone got a front wishbone for a Ford passenger car that will fit a Bell axle? I think they're 2 1/4".
--
I know the pix supposed to be of me, but I didn't wanna scare anyone!
http://www.canats2003.com/
http://groups.msn.com/MikesHotRodpicturepages

I send an email to you 47convert but didn't know if it worked been having problems with my email. Do you have one for a passenger car andif so would you sell it? How much? I really have to find one of these things!

I spoke with a reproduction company in NC and they advised me that a 35 car windshield regulator will NOT work in a 35 ford pickup. Back to the drawing board. Anybody got one for a 1935 ford pickup? Thanks!

Just keep hitting e-bay every couple of days
--
Home to Lugnut!
NSRA,GG,Doughnut Derilects,CRS, Trophy Whores,etc,etc...
Charter Member: Dipstick Street Rod Association

I'm trying Bill! This thing is like the missing link. I never thought that the repro companys would not have one. I appreciate everyones advice and help in this matter!!!! By the way how are you and the panel these days?

Detailed it on Sunday and waiting for my new LED taillights. Say have you checked with Vic (slumlord)? He has a 35 front end for sale...just mabe he has what you're looking for..
--
Home to Lugnut!
NSRA,GG,Doughnut Derilects,CRS, Trophy Whores,etc,etc...
Charter Member: Dipstick Street Rod Association

There is always Hemmings to fall back on...........

Check every couple of days on e-bay.. just type in 1935 ford and hit search.
--
Home to Lugnut!
NSRA,GG,Doughnut Derilects,CRS, Trophy Whores,etc,etc...
Charter Member: Dipstick Street Rod Association

Mac's lists one for 35/36 pick-up.price is $55....Part #V701325B....Ph# is 800-777-0948 or 716-433-1500.Handle is available for an additional $8.25.Good Luck!!They show the same for pass.car or pick-up.
--
Daryle "It's what we learn after we think we know it all that really counts!"

I called Mac's about this part number and product and of course it has been discontinued. Thanks for the help anyway!

Sorry about that...they still list it in my latest catalog...2002...Sounds like your luck and my luck are a lot alike!
--
Daryle "It's what we learn after we think we know it all that really counts!"

Yeah!! Sometimes feels like if not for bad luck would be none at all. Then it could always be worse. Thanks for the help!

You might try giving Obsolete Ford Parts a call @ 405-631-3933 or look at www.obsoletefordparts.com ...all I have is a 2000 catalog..
--
Fred P.