Dennis' 1976 FORD PINTO PANEL WAGON

Owner
gearheads

Description
This Pinto started it's life as a 2 door wagon. The wagon windows were removed and sheet metal panels were constructed and welded in their place.

The rear seats were removed and the whole area was converted to a fully carpeted cargo area. Their interior panels are made from birch woord as is the dash. Has S/W guages custom mounted into the dash. Has black rolled high back bucket seats, with black capeting and black and grey door panels.

The engine is a 2300cc overhead cam that has been bal and blueprinted, running a Racer Walsh street strip cam. Intake is Racer Walsh and the car has a Holly 500cfm 2bbl carb. Exhaust is a Hedman header into a 2 1/2 exhaust pipe exiting out the rear of the car.

Has been lowered 3 1/2 inches all around and is running 15" all alloy wheels. Disk brakes front and drum rear with a 8 inch rearend.

Presently running the stock autobox,but plan on installing a C4 (built). Also plan on running different intake with two 45dhoc webber carbs, or maybe a nitros system.

Exterior has been painted VIPER RED. If you are into PINTOS or Mercury BOBCATS have a look at the Ford Pinto Street Machines National club at http://groups.yahoo.com/group/fordpintostreetmachines

while your at it check out my web site at http://pintoperformance.tripod.com/pintoperformance

This is my ride, and I'd like to edit it.